Bush TV Software Problem (Vestel) led40127fhdcntd – Turns off and on repeatedly FIXED
Now there is many of you that would of purchased a Bush TV from Argos at some point and the TV got to a stage where it keeps turning itself on and off and you have got rid of it?, well here is the solution to this problem the firmware has become corrupt. We have found there seems to be a issue with the software on the TV when using the smart TV feature where the firmware becomes corrupt a lot of people have mistaken this for a voltages problem or connector between the PSU and main board, where in fact this is a simple Firmware problem which has effected a lot of TV’s which most of you have probably got rid of due to this issue.
Download below the firmware and follow the simple instruction step by step and you will have your TV up and running in minutes.
https://www.dropbox.com/sh/w2sny3nyttho9jf/AAAwOU2Xl5QOq1WhCV0I8tXSa?dl=0
Ensure when copying files to a USB that, The file system of USB device should be formatted in the FAT32 format for this to process to work and the TV to pick up the USB effectively.
1. Unplug TV from mains
2. Insert USB in to the LOWER socket
3. Plug TV mains back in while holding OK on remote
The TV should start flashing slowly but then speed up whilst holding ok on the remote until the firmware has been rebooted
you will then get the installation screen back on to reinstall the firmware.
Thank you so much for this. We were about to buy a new TV and had tried everything else.
I’m impressed, I need to say. Actually rarely do I encounter a blog that’s both educative and entertaining, and let me inform you, you will have hit the nail on the head. Your thought is outstanding; the problem is something that not enough persons are talking intelligently about. I am very completely satisfied that I stumbled across this in my seek for something referring to this.
can this soft run on
LED42BU4S
Good day! I could have sworn I’ve been to your blog before but after browsing through some of the articles I realized it’s new to me. Regardless, I’m certainly delighted I came across it and I’ll be book-marking it and checking back often!
how do you change the format to FAT32
hi, ive tried this with no luck..do you download all the 4 files from dropbox? im getting flashing lights 3 times then stays on red light permanetly, and nothing.. please could you help a girl out? PLEASEEEEE!
i really could use the help as its around 2yrs old and a bedroom tv, so not used loads.
Follow the instructions and you will get it to work.
may need a few attempts
1. Unplug TV from mains
2. Insert USB in to the LOWER socket
3. Plug TV mains back in while holding OK on remote
The TV should start flashing slowly but then speed up whilst holding ok on the remote until the firmware has been rebooted
you will then get the installation screen back on to reinstall the firmware.
I don’t suppose you have the download for a Bush TV DLEX43UHDHDRS 🙂