Bush TV Software Problem (Vestel) led40127fhdcntd – Turns off and on repeatedly FIXED
Now there is many of you that would of purchased a Bush TV from Argos at some point and the TV got to a stage where it keeps turning itself on and off and you have got rid of it?, well here is the solution to this problem the firmware has become corrupt. We have found there seems to be a issue with the software on the TV when using the smart TV feature where the firmware becomes corrupt a lot of people have mistaken this for a voltages problem or connector between the PSU and main board, where in fact this is a simple Firmware problem which has effected a lot of TV’s which most of you have probably got rid of due to this issue.
Download below the firmware and follow the simple instruction step by step and you will have your TV up and running in minutes.
Ensure when copying files to a USB that, The file system of USB device should be formatted in the FAT32 format for this to process to work and the TV to pick up the USB effectively.
1. Unplug TV from mains
2. Insert USB in to the LOWER socket
3. Plug TV mains back in while holding OK on remote
The TV should start flashing slowly but then speed up whilst holding ok on the remote until the firmware has been rebooted
you will then get the installation screen back on to reinstall the firmware.
- Published in Tips & Tricks